Commissioning; Optional Settings; Adding/Deleting Rts Control Points - SOMFY Heating Slim Receiver RTS 2kW Guia De Instalacion

Ocultar thumbs Ver también para Heating Slim Receiver RTS 2kW:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
- Connect the Heating Slim Receiver RTS 2kW Plug
between the heating ramp cable (c) and the mains
supply cable (d).
-
Heat = Heating ramp side
-
230 V supply = Power supply side
c
1
Output
2
Output
3
Free
Earth
-
Lock the securing hooks
-
Mount the Heating Slim Receiver RTS 2kW Plug (for
example with Rilsan® clips).
Ensure that the two quick connections are engaged
correctly.

4. Commissioning

If the installation has several Heating Slim Receiver RTS 2kW units, only one Heating Slim Receiver
RTS 2Kw should be connected at a time.
The Heating Slim Receiver RTS 2kW must be commissioned with an RTS control point.
Do not use a control point with a single button for commissioning! These control points are not suitable
for commissioning.
1)
Press the Up and Down buttons on the RTS control
point simultaneously until the heating lamp comes on
then goes out.
2)
Quickly press the PROG button on the RTS control
point: the heating lamp will come on then go out
again to indicate that the RTS control point has been
programmed into the Heating Slim Receiver RTS
2kW.

5. Optional settings

5.1. Adding/Deleting RTS control points

A maximum of 12 control points may be programmed
into a Heating Slim Receiver RTS 2kW.
Proceed in the same way to add or remove an RTS
control point.
1)
Press the PROG button on the programmed control
point (f) until the heating lamp comes on then goes
out: the Heating Slim Receiver RTS 2kW will be in
programming mode for 2 minutes.
2)
Brie y press the PROG button on the RTS control
point (g) to be added or removed: the heating lamp
comes on then goes out; the RTS control point has
been added/removed.
Copyright © 2010 Somfy SAS. All rights reserved.
Heating Slim Receiver RTS 2kW / Heating Slim Receiver RTS 2kW Plug
(c),
(d)
d
1
Live input (L)
2
Neutral input (N)
3
Free
Earth
(e).
OFF
c
d
d
c
3
2
1
1
2
PROG.
1
2
PROG.
f
+
1
2
PROG.
f
c
e
d
3
2
1
+
PROG.
g
2 min.
PROG.
g
2 min.
3
Tabla de contenido
loading

Este manual también es adecuado para:

Heating slim receiver rts 2kw plug

Tabla de contenido