OPERATION
Active functions*
Meat probe connected
Lighting on
OpenUp! - Automatic door opening
(unavailable)
OpenUp! - Automatic door opening
(unavailable)
Quick pre-heat
ECO active
Kitchen Timer active
Delayed timed operation
Timed operation
Child Lock Active
Oven pre-heat active
Pre-set programme active
Catalytic cleaning active
(unavailable)
Door lock and pyrolytic clean-
ing active (oven with pyrolytic
cleaning)
* depending on model
Connect the power supply
When you connect the power supply (or power
is restored after a power outage) the appliance
will prompt to set the current time,
flash on the display. You must set the current
time to use the appliance.
Note: In the event of a power outage, all
settings such as Duration, Temperature and
Heating Function will be lost. You will need to
re-enter the settings to continue cooking. If the
pyrolytic cleaning is interrupted (or the door
is locked for any other reason), the oven will
start the cooling and door opening procedure
before you can set the time.
44
Set the current time
When you connect the appliance to the power
supply, the minutes
Use
and
once to switch to the hour digits and then
use
and
again to confirm the current time. You will
hear a beep when the current time is stored
in the appliance. To change the current time
in the Standby mode, touch and hold
symbol will be show on the display. Touch
the
sensor once again and the digits will
start to flash. Now you can proceed to set the
current time.
The display brightness.
The LED display brightness varies depend-
ing on the time of day. The display is dimmed
during 22:00 to 06:00 and its brightness is
normal during 06:00 to 22:00. Also, the dis-
play is brighter when active than when the
appliance is in Standby mode. The display
brightness and display dimming times cannot
be changed.
Lighting
The lighting turns on each time you open the
oven door. The lighting also turns on when
the oven is in active mode. This lighting is off
in Standby mode. If the oven door remains
open for a long time, the lighting will automat-
ically turn off after about 10 minutes.
will
flash on the display.
to set the current time. Touch
to set the current time. Touch
. The