Bosch VMD01-M60 PAL Instucciones De Servicio página 15

Programming, continued English
5.2.4 Saving parameter sets
For this, use the service program VMD01Service.exe on a PC. Connect the
PC's serial interface to the unit's RS232 interface via a null-modem cable. To
save, call the program with the parameter '–pd'. The parameter data is saved in
a file in the same directory as the software. The file name may look as follows
"VMD01ParaXXXXX". XXXXX here represents the unit ID. The parameter data
can be played back in with the tool. The parameter '–pu' and the parameter file
are entered for this purpose. This allows copying of parameter sets from one
unit to another.
– 15 – A1 February 03/Trb