Festo CPV GE-ASI-4E4A CE Serie Instrucciones Para El Usuario página 23

3.6 Connection example valve terminal type 10
1
AS−Interface master
2
Combination power
supply from Festo
(electronically
safeguarded/short−
circuit proof )
3
Load voltage can
be switched off
3.7 Converting the valve terminal
The valve terminal can be fitted with double−solenoid
and/or single−solenoid valves. During conversion, the new
valve terminal configuration must be set with the DIP
switches on the bottom of the electric sub−base.
1
DIP switches on
the bottom of the
electric sub−base
Instructions on removing the electric sub−base can be found
in the Pneumatics manual. The permitted valve combinations
as well as the relevant DIP switch settings can be found in
the table in section 3.3.
Festo CPV...−GE−ASI−4E4A−...−CE
1
2
3
0703NH
English
1
23