Idiomas disponibles
Idiomas disponibles
Rotisserie
Burner
Igniter
Lighting
•
Do not lean over grill while lighting.
1.
Open
lld during lighting.
Turn on gas at LP cylinder.
2.
Push and turn the rotisserie
burner control
knob to
S Hi and hold in. You will hear a clicking
sound as the
burner is being ignited.
Ignition
should occur within
5
seconds, but continue
to hold the knob in for 10 to 30
seconds to activate
the heat sensor and maintain
ignition.
3.
Once burner has ignited,
turn knob to desired setting.
4.
If ignition
does NOT occur in 5 seconds, turn the
burner control OFF. Wait
5 minutes for gas to clear
away, and repeat the lighting
procedure.
Searing
Side Burner
Igniter
Lighting
•
Do not lean over grill while lighting.
1.
Open the side burner lid during lighting.
Turn on the
gas at LP cylinder.
2.
Push and turn the side burner knob to SHi and hold
in. You will hear a clicking
sound as the burner is
being ignited.
Ignition should occur within 5 seconds,
but continue
to hold the knob in for a full 10 seconds
to maintain
ignition.
3.
Once burner has ignited,
turn knob to desired
heat
setting.
4.
If ignition
does NOT occur in 5 seconds, turn the
burner control
knob to OFF. Wait
5 minutes for gas
to clear away, and repeat the lighting
procedure.
Side Burner
Match
Lighting
the Main
Burners
1.
Place match into match holder (hanging on inside
cabinet
door).
2.
Strike the match and position
lit match through
the
grates and hold next to the burner.
3.
Push in and turn burner control
knob to SHi. Continue
to press in on the control
knob until the burner ignites
or up to 5 seconds.
4.
If ignition
does NOT occur in 5 seconds, turn the
burner control
knob OFF, wait 5 minutes for gas to
clear away, and repeat the lighting
procedure.
5.
When
lit, turn knob to desired
heat setting.
Match
Lighting
the Rotisserie
Burner
1.
Place match into match holder. Strike the match and
position
it close to the front of the rotisserie
burner.
2.
Push in and turn rotisserie
burner control
knob to SHi.
Continue
to press in on the control
knob until the
burner ignites.
Ignition should occur within 5 seconds,
but continue
to hold the knob in for 10 to 30 seconds
to activate the heat sensor and maintain
ignition.
3.
If ignition does NOT occur in 5 seconds, turn the
burner control
knob OFF_ wait 5 minutes for gas to
clear away, and repeat the lighting
procedure.
4.
When
lit, turn knob to desired
heat setting.
Turn controls and gas source or tank OFF when
not in use.
If ignition does NOT occur in 5 seconds, turn the
burner controls OFF, wait 5 minutes and repeat
the lighting procedure. If the burner does not
ignite with the valve open, gas will continue to
flow out of the burner and could accidentlv
ignite with risk of injury.
Match-Lighting
•
Do not lean over grill while lighting.
•
Open lld. Turn on gas at LP cylinder slowly.
•
Light burners one at a time.
Match
Lighting
the Searing
Side Burner
1.
Place match into match holder. Strike the match and
position
it close to the center of the side burner.
2.
Push in and turn side burner control
knob to SHi.
Continue
to press in on the control
knob until the
burner ignites or up to 5 seconds.
3.
If ignition does NOT occur in 5 seconds, turn the
burner control
knob OFF, wait 5 minutes for gas to
clear away, and repeat the lighting
procedure.
4.
When
lit, turn knob to desired heat setting.
Match
Holder
I Side Burner
I
