Memorising A Station; Dab Frequency Table (Band Iii); Timer And Sleep Operation (Remote Control Only); Timer Playback - Sharp XL-BB20D Manual De Manejo

Changing the information display
(continued)

■ Memorising a station

You can store 30 DAB stations in memory and recall them
at the push of a button. (Preset tuning)
1
Tune to the desired DAB station.
2
Press the MEMORY button.
3
Within 30 seconds, press the PRESET ( or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY button to store
that station in memory. If the "MEM" and preset num-
ber indicators disappear before the station is memo-
rised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change
a preset station. When a new station is stored in the
memory, the station previously memorised for that pre-
set channel number will be erased.
Note
To erase entire preset memory, refer "To erase entire
preset memory" on page 14.

■ DAB Frequency table (BAND III)

Frequency Label
174.928 MHz 5A
176.640 MHz 5B
178.352 MHz 5C
180.064 MHz 5D
181.936 MHz 6A
183.648 MHz 6B
185.360 MHz 6C
187.072 MHz 6D
188.928 MHz 7A
190.640 MHz 7B
192.352 MHz 7C
194.064 MHz 7D
195.936 MHz 8A
197.648 MHz 8B
199.360 MHz 8C
201.072 MHz 8D
202.928 MHz 9A
204.640 MHz 9B
206.352 MHz 9C
* Frequencies are displayed to two decimal places on
this unit.
Frequency Label
208.064 MHz 9D
209.936 MHz 10A
211.648 MHz 10B
213.360 MHz 10C
215.072 MHz 10D
216.928 MHz 11A
218.640 MHz 11B
220.352 MHz 11C
222.064 MHz 11D
223.936 MHz 12A
225.648 MHz 12B
227.360 MHz 12C
229.072 MHz 12D
230.784 MHz 13A
232.496 MHz 13B
234.208 MHz 13C
235.776 MHz 13D
237.488 MHz 13E
239.200 MHz 13F
EN-18
Timer and sleep operation (Remote
control only)

Timer playback:

The unit turns on and plays the desired source (CD,
TUNER, DAB, USB, LINE IN, AUDIO IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer (" " indicator):
Once timer play works for one time only at a preset time.
Daily timer ("DAILY" indicator):
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio
programme, and use the daily timer to wake up.
1
Set the daily and once timer (pages 18 - 19).
1 minute or more
Daily timer
Start Stop
■ Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer to
page 8). If it is not set, you cannot use the timer function.
● For timer playback: Plug in USB or load discs to be
played.
1
Press the (ON/STANDBY) button to turn the power on.
2
Press the TIMER button.
3
Press the or
"Daily", and press the ENTER button.
4
Press the or
Set", and press the ENTER button.
5
To select the timer playback source (CD, TUNER,
DAB, USB, LINE IN, AUDIO IN), press the
button. Press the ENTER button.
When you select the tuner or DAB, select a station
by pressing the
press the ENTER button. If a station has not been
programmed, "No Preset" will be displayed and timer
setting will be cancelled. To memorise a station, refer
'Memorising a station' on page 14 or 18.
6
To adjust the day, press the
and then press the ENTER button.
7
Press the or
and then press the ENTER button.
8
To adjust the minutes, press the
button and then press the ENTER button.
9
Set the time to finish as in steps 7 and 8 above.
10
To adjust the volume, press the
ton and then press the ENTER button.
11
Press the (ON/STANDBY) button to enter the power
standby mode. "TIMER" indicator lights up.
Once timer
Start Stop
button to select "Once" or
button to select "Timer
or button, and then
or button
button to adjust the hour,
or
or but-
or