Messages on the S8 Series II LCD
Your clinician may have set your S8 Series II device to remind you about important
events, such as when to replace your mask, when to insert your Data Card (if your
device is Data Card enabled) and so on.
The reminder message is displayed on the LCD and is visible if the device is not
delivering therapy. The backlight on the LCD flashes when a message is displayed.
Your clinician can set any of the following reminders on your LCD:
Message
Description
INSERT
May appear if your device is
CARD
Data Card enabled.
REPLACE
May appear when your mask
MASK
is due for replacement.
CALL
May appear as a reminder to
PROVIDER
contact your clinician, eg, to
discuss how your therapy is
going.
REPLACE
May appear as a reminder to
FILTER
replace the air filter on your
device.
SERVICE
May appear as a reminder to
DUE
return your device for service.
Using the Data Card to Collect Data
If your clinician needs to review your treatment, they will ask you to use the Data Card
to copy data from your S8 Series II, and to return the card to them. The Data Card will
be provided in a protective folder.
Data that is copied to a Data Card is still stored and available on the S8 Series II device.
Copy Data onto the Data Card
1
Switch on the S8 Series II and wait until you see the standby (Ramp) screen.
2
Hold the Data Card with the arrow facing up and insert it into the Data Card slot
until it stops. Data copying starts automatically.
The "Card Inserted Please Wait" message is displayed on the S8 Series II LCD
while data is being copied. Copying takes approximately five seconds.
The "Copy Complete Remove Card" message is displayed on the LCD when
copying has finished.
Action
Insert your Data Card and follow any
instructions that your clinician has given you.
When you have done this, the message will
disappear from the LCD. Pressing
will also remove the message.
Press
(Ok) to remove the message
from your LCD, and replace your mask with a
new one.
Press
(Ok) to remove the message
from your LCD, and contact your clinician.
Press
(Ok) to remove the message
from your LCD, and replace the air filter.
Press
(Ok) to remove the message
from your LCD, and contact your clinician.
Messages on the S8 Series II LCD
(Ok)
9