Control Panel; Stainless Steel Surfaces (On Some Models); Oven Light Bulb - Caso EO 27 Manual De Instrucciones Original

16.7 Control panel

16.8 Stainless steel surfaces (on some models)

16.9 Oven light bulb

caso EO 27
• It is a good idea to wipe the control panel after each use.
Clean it with dry soft cloth. Do not use abrasive cleansers,
strong liquid cleansers, plastic scouring pads or oven
cleansers on the control panel-they will damage the finish.
• Do not use the stainless steel cleaners for it will scratch the
surface. Use a hot, damp cloth with a mild detergent suitable
for stainless steel surfaces. Use a clean, hot, damp cloth to
remove soap. Dry with a dry, clean cloth.
• If food soil remains, try a general kitchen cleaner. For hard-
to-clean soil, use a standard stainless steel cleaner. After
cleaning, use a stainless steel polish. Follow the product
instructions for cleaning the stainless steel surface.
Please note
The glass cover (on some models) should be removed only
when cold. Wearing latex gloves may offer a better grip.
• Before replacing the bulb, disconnect electrical power to the
oven at the main fuse or circuit breaker panel. Let the bulb
cool completely before removing it. For your safety, do not
• touch a hot bulb with a damp cloth. If you do, the bulb will
break.
To remove:
• Turn the glass cover counterclockwise1/4 turn until the tabs
of the glass cover clear the grooves of the socket. Remove
the bulb.
• To replace:
• Put in a new 25-watt appliance bulb. Place the tabs of the
glass cover into the grooves of the socket. Turn the glass
cover clockwise1/4 turn.
83