Electrical Requirements - Caso EO 27 Manual De Instrucciones Original

13.5 Electrical requirements

caso EO 27
In order to get the oven operating normally, the type of cabinet
must be correct.
Cabinet with a veneer exterior must be assembled with glue
which can withstand temperature up to 120°C.
In accordance with the safe rules, after installation of the oven,
it should not touch the electric parts.
• These appliances must be supplied with proper voltage and
frequency (AC220-240V, 50Hz), and connected to an
individual, properly grounded branch circuit, protected by a
circuit breaker. (The voltage on the brand which located on
the frame of oven.)
Warning
Electrical ground is required on this appliance.
Do not connect to the electrical supply until appliance is
permanently grounded.
Disconnect power to the junction box before making the
electrical connection.
This appliance must be connected to a grounded, metallic,
permanent wiring system, or a grounding connector should be
connected to the grounding terminal or wire lead on the
appliance.
Power supply line should avoid touching the crust sheet metal
of the electric oven. When they touch each other the chances
rise that the oven crust sheet metal will mangle the insulated
layer of the power supply line due to the high temperatures.
Do not use a gas supply line for grounding the appliance.
65