Cleaning And Maintenance; How To Remove The Packaging Tap; To Clean The Inside Of The Door; Oven Door - Caso EO 27 Manual De Instrucciones Original

16 Cleaning and Maintenance

16.1 How to remove the packaging tap

16.2 To clean the inside of the door

Take out the ventilation cover by losen
the screws

16.3 Oven Door

caso EO 27
This chapter provides you with important notices with regard to
cleaning and maintaining the device. Please observe the
notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
• To assure no damage is done to the finish of the product, the
safest way to remove the adhesive left from packaging tape
on new appliances is an application of a household liquid
dishwashing detergent, mineral oil or cooking oil.
• Wipe and then apply an appliance polish to thoroughly clean
and protect the surface.
• Do not rub or clean the gasket of the door----because the
gasket has the poor ability to prevent abrasion.
• If you find the gasket has the abrasion, chafe or dilapidation,
or the gasket is shift, please change it.
• Using soap and water to clean two sides of the oven and the
bottom of the oven.
• Take out the ventilation cover and using the soap and water
or detergent to clean.
Wipe the surface with a soft towel.
• To remove the oven door: first open the oven door utmost,
open the buckle of the hinges utmost, which locate below the
door, then close the door to lock the hinge and buckle, at last
78