Blower Assembly - Southland SHB25170.1 Manual Del Operador

Assembly
(Continued)
• Save all instructions

Blower Assembly

WARNING
Blower tube installation affects both Blower balance and
performance. The tube and nozzle must be installed
correctly.
Never use the Blower without the upper and lower tubes
correctly fitted to the Blower.
WARNING
Rotating impeller blades can cause severe injury! Stop
the engine before installing or removing the Blower
tubes. Never perform any maintenance or assembly
procedures on this Blower while the engine is running.
1. Align the arrow on the upper tube with the arrow
on the lower tube. (Fig. 2 ).
2. Slide the lower tube to the upper tube.
3. Turn the lower tube clockwise until a click is reached
to secure the lower tube to the upper tube. (Fig. 3)
4. Align the arrow on the upper tube with the arrow on
the Blower outlet. (Fig.4)
5. Slide the upper tube to the Blower outlet.
6. Turn the upper tube clockwise until a click is
reached to secure the upper tube to the Blower
outlet. (Fig.5)
Questions? Call Toll Free at 1-800-737-2112
ENG - 6
Fig. 2
Copyright © 2015 MAT Engine Technologies, LLC
Fig. 3
Fig. 4
Fig.5