Safety Definitions
• Save all instructions
Safety Warning Symbols:
WARNING! Your safety is involved.
Read these instructions carefully.
Always wear eye protection that meets
or exceeds the requirements of ANSI
Z87.1.
Wear hearing protection.
Wear breathing protection.
Wear safety footwear.
Wear safety gloves.
Rotating impeller blades can cause
severe injury.
Control and Operating Symbols:
Choke Control:
Cold Start
Run/Warm Start
Fuel Primer:
Press 6 times.
Safety Alert Symbols:
The symbols below identify important safety information in this manual. Become familiar with these symbols and
the warnings associated with these symbols.
Indicates an imminently hazardous situation which, if not avoided, will result in death or
DANGER
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
WARNING
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
CAUTION
moderate injury or equipment/damage property.
Questions? Call Toll Free at 1-800-737-2112
50 ft
15 m
ENG - 2
Keep all bystanders at least 50 ft.
(15 m) away.
This equipment can throw small objects
at high speed causing personal injury.
Inspect area where used and remove
all foreign objects.
Fuel is flammable. Handle with care.
Extremely hot surface. Do not touch
a hot muffler, gear box or cylinder,
you may get burned. These parts
get extremely hot from operation and
remain hot for a short time after the unit
is turned off.
To prevent entanglement, always wear
protective hair covering to contain
long hair.
Fuel Mixture:
50:1
(Unleaded Gas : 2 Cycle Oil)
Ignition Switch:
ON - Engine Run
OFF - Engine Stop
Copyright © 2015 MAT Engine Technologies, LLC