Technical Data; Noise/Vibration Information - Bosch GOF 2000 CE Professional Manual Original

OBJ_BUCH-622-004.book Page 15 Tuesday, October 18, 2016 11:44 AM
15 Left handle (insulated gripping surface)
16 Release lever
17 Thumbwheel for speed preselection
18 Lock-on button for On/Off switch
19 On/Off switch
20 Lock for release lever
21 Open-end spanner, size 24 mm*
22 Router bit*
23 Extraction hose (Ø 35 mm)*
24 Extraction adapter*
25 Wing bolt for extraction adapter (2x)*
26 Parallel guide*
27 Guide rod for parallel guide (2x)*
28 Wing bolt for fine adjustment of parallel guide (2x)*
29 Wing bolt for coarse adjustment of
parallel guide (2x)*
30 Fine-adjustment knob for parallel guide*
31 Adjustable edge guide for parallel guide *
32 Extraction adapter for parallel guide*
33 Router compass/guide-rail adapter*
34 Router compass handle*
35 Wing bolt for coarse adjustment of
router compass (2x)*
36 Wing bolt for fine adjustment of
router compass (1x)*
37 Fine-adjustment knob for router compass*
38 Centring screw for compass stop *
39 Base spacer
(included in the "router compass" set)*
40 Guide rail*
41 SDS guide-bushing adapter
42 Fastening screw for guide bushing adapter (2x)
43 Release lever for guide bushing adapter
44 Guide bushing*
45 Fastening screw for guide plate (4x)
46 Centring pin*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Plunge router
Article number
Rated power input
No-load speed
Speed preselection
Constant electronic control
Connection for dust extraction
Tool holder
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Bosch Power Tools
Plunge router
Plunge depth
Weight according to
EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-17.
Typically the A-weighted noise levels of the product are:
Sound pressure level 89 dB(A); Sound power level
100 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-17:
a =5.0 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools
or is poorly maintained, the vibration emission may differ.
This may significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work
patterns.
Assembly
 Before any work on the machine itself, pull the mains
plug.
Inserting a Router Bit (see figure A)
GOF 2000 CE
 It is recommended to wear protective gloves when
3 601 F49 ...
inserting or replacing router bits.
W 2000
Depending on the application, router bits are available in the
-1
min 8000–21000
most different designs and qualities.

Router bits made of high speed steel (HSS) are suitable for

the machining of soft materials, e. g. softwood and plastic.

Carbide tipped router bits (HM) are particularly suitable for
hard and abrasive materials, e. g. hardwood and aluminium.
mm 8–12.7
Original router bits from the extensive Bosch accessories
inch ¼–½
program are available at your specialist shop.
mm
kg
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s .
2 610 041 858 | (18.10.16)
English | 15
GOF 2000 CE
65
6.0
/II