Starrett 2900 Serie Guia Del Usuario página 20

ENGLISH
SETTING THE LIMITS (GO/NO GO FUNCTION)
(CONTINUED)
4. Press the SHIFT/SET button. The LIMIT icon will
flash on/off.
5. Adjust the spindle to the desired minimum value.
6. Press the SHIFT/SET button to capture the minimum
value. The LIMIT icon will stop flashing.
7. Press the LIMITS button. The MAX LIMIT icon will appear
in the top middle of the display Fig. 14 next page.
8. Press the SHIFT/SET button. The LIMIT icon will
flash on/off.
9. Adjust the spindle to the desired maximum value.
10. Press the SHIFT/SET button to capture the
maximum value. The LIMIT icon will stop flashing.
11. Press the LIMITS button to use the go/no go
function. The display will flash unless the reading
is within the range that you set your limits to. The
SET icon will remain on. The MAX and MIN icons
will stay off as long as the reading is within the
set limits. If the measurement is beyond the set
limits, the display will flash and the MIN or MAX
LIMIT icon will indicate the direction the limit has
been exceeded. To exit Press the LIMITS button.
20 PKG08803-UM2900