POWER REQUIREMENTS AND CURRENT CONSUMPTION
Battery
Automatic Sleep Time 30 minutes of non-use
SPC SERIAL OUTPUT
18 ASCII Characters
COMMUNICATION PROTOCOL
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Data Request and
Response Timing
2 – CR2032 Lithium Coin Cells
Capacity 240 mAh
1 Space Character
2 Status characters indicating the operating mode
• BLANK - Normal mode
• OL - Displacement outside Lower Limit
• OU - Displacement is outside the Upper Limit
• MN - Displacement is minimum peak displacement stored
• MX - Displacement is minimum peak displacement stored
• TR - Displacement is the T.I.R. stored
• LL - Displacement is the lower or minimum limit setting
• LU - Displacement is the upper or maximum limit setting
• HL - Displacement is a held displacement
1 Sign Character (minus but no plus)
1 Space Character (IN mode only)
6 Digits
1 Decimal point
2 Spaces
2 Character strings to indicate units "IN" or "mm"
1 Carriage Return
1 Line Feed
4800
8
None
2
None
Receive High to Low Momentary
Response Time Delay 120 ms
Transmit Time 45 ms
ENGLISH
PKG08803-UM2900
13