Burner Control Knob Bezels; Before Using The Appliance For The First Time - Thermador SGS Serie Manual Del Usaurio

Burner Control Knob
Bezels
Before Using the
Appliance for the
First Time
English 8
The standard burner controls have an infinite number of heat settings. At the low
position on the XLO burners a detent or notch may be felt.
To operate: Select the appropriate control knob, push down and turn counter-
clockwise to the desired flame size. Turn OFF by turning the control knob clock-
wise to OFF.
The bezels for standard burner controls feature one unnotched area on the under-
side. This single area snaps into the straight area in the cooktop so that OFF is at
the 12 o'clock position.
To remove knob and bezel: With burner in the OFF position, gently lift knob up
and off. Gently lift the bezel from the sides and pull up.
WARNING:
bezel opening into rough-in box.
To replace bezel and knob: With the OFF on the bezel in the 12 o'clock position,
press to snap in place. Replace control knob by placing indicator line at the 12
o'clock position; press down firmly. For models SGSX only, be sure to replace
ExtraLow® bezels in the 2 left burner positions.
• Remove all packing materials and literature from the cooktop surface.
• While cool, wipe with a clean, damp sponge and dry.
• There may be a slight odor during the first several uses; this is normal and will
disappear.
• Optimum cooking results depend on the proper cookware being selected and
used. (See Proper Cookware.)
• Read all safety precautions and Use and Care Manual information prior to
operating.
To avoid possible electric shock, do not reach through