Unpacking And Setting Up - Sono Swiss SW Dura T Serie Manual De Istrucciones

5 PRIOR TO FIRST START-UP

5.1 Unpacking and setting up

Packaging
Keep the packaging for customer service purposes, if possible. If disposing of the packaging, observe the applicable disposal regulations.
You may return the packaging to the manufacturer or the supplier.
Check for transport damage
Inspect the unit before the first start-up for possible transport damage. In the event of obvious damage, do not start up the unit.
Please contact your supplier and the carrier.
Set-up surface
For operation, set up the unit on a stable, level, dry surface that is resistant to the cleaning liquid.
Ensure sufficient ventilation at the set-up location of the unit!
DANGER
Risk of electric shock from ingress of liquid!
Protect the unit against ingress of moisture.
The inside of this unit is protected against dripping liquids on the outside.
Nevertheless, keep the set-up surface and the housing dry to prevent electrical accidents and damage to the unit.
Environmental conditions
The following prerequisites must be met for the safe operation of this unit:
• Permissible ambient temperature during operation: +10°C to +40 °C
• Permissible relative humidity during operation: max. 80%
SONOS_2019_01_Gebrauchsanleitung_DURA-T-und-S_lay06-P.indd 47
EN | 47
24.04.19 15:52