Sono Swiss SW Dura T Serie Manual De Istrucciones página 34

2.2 Safety information on using the unit
Mains connection
For safety reasons, the unit may only be connected to a properly earthed power socket. The technical specifications on the
rating plate must match the connection conditions available on site. In particular the mains voltage and the connected load.
Placement
Set up the unit at a dry location with adequate ventilation for discharging the vapours of the cleaning liquid.
Keep the set-up surface, housing and operating controls dry. Protect against ingress of moisture!
Preventing electrical accidents
For filling, maintenance and care of the unit, if suspecting ingress of liquid, in case of operating malfunctions, and after use, disconnect the mains plug.
Electrically skilled persons only may open the unit!
Cleaning liquid
Use only aqueous cleaning liquids with this unit.
Fire and explosion hazard! Never expose flammable liquids to direct ultrasonic irradiation in the cleaning tank.
Hot surfaces and liquids
Risk of burns and scalding! Depending on the running time of the unit, the unit surfaces, cleaning liquid, cleaning basket and
items being cleaned can become very hot.
Hot steam
During operation at very high bath temperatures, opening the unit cover can cause hot steam to escape at the front.
Move unit only if empty
Do not move the unit while it is filled, obstacles could cause it to tip over.
Noise emission
Ultrasonic units can cause unpleasant hearing sensations under certain circumstances.
Use personal hearing protection when you are in the vicinity of an ultrasonic unit operated without a cover.
34 | EN
SONOS_2019_01_Gebrauchsanleitung_DURA-T-und-S_lay06-P.indd 34 24.04.19 15:52