Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PRE-FILTER CLEANING
To Reinstalh
The pre-filter
is located
inside
the dust
cup.
Check the pre-filter
frequently
and
clean when dirty,
1. Remove the dust cup as outlined in the
EMPTYING DUST CUP (page 15),
NOTE:
Make
sure dust cup is free of
debris
before
opening.
2. Rotate
dust cup lid assembly
counterclockwise
as indicated
on the lid
and lift off,
Dust Cup
LOCKED
;e)
UNLOCKED
(For Cleaning)
3. Grasp pre-fitter
and rotate as
shown to remove.
4. Clean
pre-fitter
by gently
tapping
over a trash
container.
Tap on
several sides to
ensure best
cleaning.
If necessary, rinse with cold water only,
DO NOT use detergent or soap. Allow
parts to dry 24 hours before putting back
into vacuum cleaner.
DO NOT wash in the dishwasher.
DO NOT install damp.
1. Align
the
slots on the pre-
filter
with the
alignment
tabs
inside dust cup
lid assembly.
Tabs _ Slots
'2. Rotate
pre-filter
as shown
to lock in
place.
3. Replace
the lower
portion of the dust
cup by aligning
marks as shown,
UNLOCKED
(For Cleaning).
UNLOCKED
(For
=ning)
LOCKED
(For Use)
4. Rotate
while
pressing
downward
until
marks
align
as shown
above
in LOCKED
(For
Use),
5. Reinstall the dust cup, See EMPTYING
DUST CUP (page 15).
=17=
Tabla de contenido
