ClearSounds A600 Manual Del Operador página 24

█ Turning the Handset "Power On/Off" Mode
The A600 handset can be turned to "Power Off" mode, which
can be a convenient way to prevent the phone from ringing
without having to change the ringer setting. When you turn the
handset to "Power Off" mode, calls can't be made or received
until you turn the power back "On".
In Standby Mode (not during a live call):
1. To turn the handset "Off", simply press and hold
until the display turns off.
2. To turn the handset "On", you can either:
a. Place the handset back into the base and the
b. Press and hold
█ Using your Phone with Hearing Aids and Cochlear
Implants
Your phone can be used with hearing aids and cochlear implants
equipped with a telecoil (T-coil). Adjust your hearing aid "T-
switch" to the "T" position. Make sure to hold the handset
close to your T-coil.
Using the Phone Hands-Free Headset Jack
█
Your phone is equipped with a Phone Headset jack (located on
the left side of the handset), providing flexibility and multi-
functionality. This jack is amplified, allowing you to adjust
both the tone and volume the same as you would through the
handset or speakerphone.
By using this jack, you can listen and speak through your hands-
free headset. This 2.5mm phone headset jack accommodates a
variety of optional hands-free accessories including neckloops,
headphones, silhouettes, and cellular accessories.
NOTE: When a 2.5mm audio device is plugged in, the incoming
audio signal to the handset will now be transferred to the
headset jack. No output on the handset will be heard. As soon
as you plug your headset into the jack, it will be activated.
handset will automatically power on.
until the display turns on.
24 – ENGLISH