ClearSounds A600 Manual Del Operador página 23

received through the phone network (outside calls) and internal
calls (INT) received from other A600 handsets registered to
the base.
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press down
the Select soft key.
4. Press the Select soft key to select INT Ring or press
down
soft key.
5. Press up
and then press the Select soft key. You can select the
ring tone from Melody 1-Melody 10 and adjust the
volume from Volume 1-Volume 5, or Off. When adjusting
the Melody or Volume, the handset plays the selected
melody/loudness.
6. Press the Save soft key to confirm.
7. Press the Back soft key to return to the previous menu
and select INT Ring or Ext Ring to repeat the process.
NOTE: If you set the volume to "Off", when a call comes in,
only the New Call information appears on the LCD and the
phone will not ring.
NOTE: You can also adjust the ringer volume while you are
receiving an incoming call. Press up
increase or decrease the volume while the phone is ringing.
Visual and Vibrating Ringer
You can activate the visual ringer and vibrating handset
function. A bright LED light will flash and the handset will
vibrate when the phone rings. To turn this feature on/off:
1. In standby mode, press and hold
appears to activate and press and hold
deactivate.
or down
to scroll to Ring Setup and then press
to select EXT Ring, and then press the Select
or down
23 – ENGLISH
to scroll to HS Settings and
to select Melody or Volume
or down
until the
to
icon
again to