Engaging And Disengaging The Chain Brake; Removing And Fitting The Battery; Switching The Saw On/Off - Stihl MSA 120 C Manual De Instrucciones

English
► With a suitable tool, turn the oil tank cap coun‐
terclockwise until it can be removed.
► Remove the oil tank cap.
► Fill up with saw chain oil, taking care not to
spill any oil and not to overfill the tank.
► Place the oil tank cap on the tank opening.
► With a suitable tool, turn the oil tank cap clock‐
wise and tighten it down firmly.
The oil tank is closed.
8 Engaging and Disengaging
the Chain Brake
8.1 Engaging the Chain Brake
The saw is equipped with a chain brake.
The chain brake is activated by the inertia of the
front hand guard if the kickback force is high
enough or can be engaged by the operator.
► Push the hand guard away from the handlebar
with your left hand.
The hand guard engages with an audible click.
The chain brake is engaged.
8.2 Disengaging the Chain Brake
50

8 Engaging and Disengaging the Chain Brake

► Pull the hand guard toward the handlebar with
your left hand.
The hand guard engages with an audible click.
The chain brake is disengaged.
9 Removing and Fitting the
Battery
9.1 Fitting the Battery
► Engage the chain brake.
1
2
► Insert the battery (1) in the battery compart‐
ment (2) and press it home until you hear a
click.
Arrows (3) on battery (1) are still visible and
battery (1) is held securely in battery compart‐
ment (2). There is no electrical contact
between the saw and battery (1).
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages with a second click
and is flush with the saw's housing.
9.2 Removing the battery
► Stand the saw on a level surface.
► Press the locking lever (1).
The battery (2) is unlocked and can be
removed.

10 Switching the Saw On/Off

10.1
Switching On
► Disengage the chain brake.
3
2
1
0458-716-9821-E