Using The Usb Floppy Disk Drive - Sony MPF88E-UA Guía De Instrucciones

To remove the stand
1
Holding the drive vertically,
push down the front of the
stand, taking care not to let it
fall.
2
Remove the stand hook from
the notch at the rear of the
drive.
Using the USB
Floppy Disk Drive
This section describes how to use the
drive.
With a Windows system
1
Holding a floppy disk label side
up, push it into the drive until
you hear a click.
Label side
Note
When you are using the drive vertically,
insert the floppy disk so that the label side
faces the same direction as the color
panel.
2
Perform the desired operations
with the floppy disk from your
computer.
3
To eject the floppy disk, wait
until the status indicator goes
off, and then push the eject
button.
Note
Do not eject the floppy disk from the
drive while the status indicator is on as
this may result in data loss or damage.
Color panel
Continued
GB
9