Wiring; Wiring-Wall Control - Craftmade Targas TG52 Guia De Instalacion

7. Wiring.

CAUTION: Be sure outlet box is properly grounded and
that a ground wire (GREEN or Bare) is present.
Make sure all electrical connections comply with Local
Codes or Ordinances and the National Electrical Code. If
you are unfamiliar with electrical wiring or if the
house/building wires are different colors than those
referred to in the instructions below, please use a
qualified electrician.
Note: Excess lead wire length from the fan can be cut to
the desired length and then stripped.
When fan is secured in place on the hanging bracket,
electrical wiring can be made as follows:
Connect BLACK and BLUE wires from fan to BLACK
wire from ceiling. Connect WHITE wire from fan to
WHITE wire from ceiling. Connect all GROUND
(GREEN) wires together from fan to BARE/GREEN wire
from ceiling. Use wire connectors provided when
making connections.
If you intend to control the fan light with a separate
light switch connect BLUE wire from fan to the
BLACK (or RED) supply from the independent switch.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
8. Wiring - Wall Control
Remove existing wall switch. Wire the wall
control as shown in diagram at right.
Connect BLACK/WHITE wire from wall control
to BLACK (AC IN L) wire in outlet box. Connect
BLACK wire from wall control to BLACK (AC IN
L) wire from fan (inside the outlet box). Connect
BLUE wire from wall control to BLUE wire from
light in the outlet box.
ground wire from wall control to ground wire in the
Use wire connectors provided when
outlet box.
making connections.
*Wrap each wire connector separately with
electrical tape as an extra safety measure.
Gently push wires and taped wire connectors
into outlet box.
Attach wall control to outlet box and secure
with screws from original wall switch. Attach
plate (included) to wall control using 2 screws
provided with the wall control.
Connect GREEN/YELLOW
white supply wire
black supply wire
from ceiling
black
white
white
black
blue
from fan
BLACK
BLACK/WHITE
(AC IN L)
outlet box
BLUE
green/
bare
ground
BLACK BLACK
(AC IN L
from fan)
page 7
ground
(green or bare)
BLUE
GREEN/
YELLOW
wall control
ground
(green
or bare)
*
plate
screw
plate