Storage And Cleaning; Training And Important Things To Know - Spanset Magnum-X Serie Borrador De Las Instrucciones

Magnum-X round slings should no longer be used if, for example:
- the label is missing and the manufacturer is unknown,
- the round sling's load-bearing core encased by the tube sleeve is
damaged,
- the tube sleeve and/or core have been damaged by the effects of
heat (such as welding beads),
- the fabric has been damaged by acid or lye. Magnum-X round slings
can be disposed of with household waste as long as the fabric has
not been contaminated with oils, raw materials, etc. If the fabric
has been contaminated by chemicals, Magnum-X round slings must
be disposed of as special waste.

5 Storage and cleaning

Maintenance and proper storage prolong the quality and functionality
of SpanSet Magnum-X round slings. Therefore, inspect the Magnum-
X round slings after each use! Damaged Magnum-X round slings
must be removed from use or repaired, and soiled Magnum-X round
slings must be cleaned before they are put into storage (see 2 Safety
instructions and handling). Keep the Magnum-X round slings clean,
dry and well ventilated, and protect them from direct sunlight and the
effects of chemicals.

6 Training and important things to know

SpanSet Magnum-X round slings fully meet the requirements of BGR
500, 1492-2, EC machine guideline 2006/42/EC, as well as ZH 1/324
and BGI 556. Please note that the standards and guidelines listed are
only examples. Please be aware that specific industries and applica-
tions may have special safety requirements that must be complied
with. When using textile slings, observe regional occupational safety
regulations, such as the rules of the professional associations in
Germany. You can get more information and access sources for the
regulations from your SpanSet dealer or directly from SpanSet.
Page
EN
19