User's Manual
User's Manual
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in residential installations. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Move the equipment away from the receiver.
-
Plug the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/television technician for additional suggestions.
You are cautioned that any change or modifications to the equipment not expressly approved
by the party responsible for compliance could void your authority to operate such equipment.
If the time comes to dispose of this device, please recycle
it properly. It cannot be treated as municipal waste. It must
be disposed of separately via the appropriate return and
collection systems available.
Disposal of waste batteries
(applicable in the European Union and other
European countries with separate collection systems)
This symbol on the battery or on its packaging indicates that the battery provided
with this product shall not be treated as household waste.
On certain batteries, this symbol might be used in combination with a chemical
symbol. The chemical symbols of mercury (Hg) or lead (Pb) are added if the
battery contains more than 0.0005% mercury or 0.004% lead.
To ensure the battery will be treated properly, convey the product to the applicable collection
point for the recycling of electrical and electronic equipment and hand the battery over to the
applicable collection point for recycling of waste batteries.
Page 2
User's Manual
User's Manual
Care and Safety Information
Please follow all warnings, precautions and maintenance as recommended in this user's
guide.
Avoid Hearing Damage:
Listening at high volume for a
long period of time could cause
damage to your ears.
Usage Notice:
Turn off and unplug the power before cleaning the product.
●
Use a soft, dry cloth with mild detergent to clean the display housing.
●
Unplug the power if the product is not used for a long period of time.
●
Ensure that the ambient room temperature is within 32 - 95°F.
●
Relative Humidity should be between 20-80%.
●
It's normal that the projector will feel warm with continuous use.
●
Please attach the tripod to the engine in the vertical direction. Incorrect use of tripod may
●
damage the tripod socket.
Do not:
Block the ventilation opening.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
► In extremely hot, cold or humid environments.
► In areas susceptible to excessive dust and dirt.
► Near any appliance generating a strong magnetic field.
► In direct sunlight.
Page 3
Eye Safety
War nings!
Avoid staring/facing directly into
the projector beam at all times.