Reset Your Device - Tumi Portable Projector Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

User's Manual
User's Manual
Specifications
Item
Description
Optical Technology
DLP
Light Source
RGB LED
Aspect Ratio
16:9 (4:3 compatible)
Luminous Flux
Up to 50 Peak Lumens
(*ANSI Lumens: 40 Lumens)
Resolution
854 x 480 Pixel (WVGA)
Projection Image Size
25cm ~ 215cm (9" - 85")
Projection Distance
35cm ~ 300cm (14" - 118")
Zoom & Focus
Manual
Contrast Ratio
2000:1
Throw Ratio (Diagonal:
1.59 (Projection Distance/Width of Image)
Distance)
Offset
100%
Playback Format
Photo: JPEG, BMP
Video: H.264: *.mov, *.avi, *.mp4, *.3gp
MPEG-4: *.mov, *.avi, *.mp4, *.3gp
Audio: *.mp3, *.wav, *.ogg
Document: *.ppt, *.pdf (converting via bundled software)
Audio Speaker
Mono
Built-in Memory
128MB
Memory Slot
SD/SDHC/MMC card up to 32GB
Power Supply
Input: 220 ~ 240V AC
Output: 5V, 3.6A DC
Battery Life
Enhanced Mode: 60min
Eco Mode: 120min
Power Consumption
1. Power Mode: Enhanced: 11.7W, Eco: 6.2W
2. Battery Mode: Enhanced: 11.4W, Eco: 4.8W
Weight
225g
Dimension
134 x 69 x 25 mm
Humidity
20-80%, 80% (Max.), non-condensing.
32° - 95°F (0° - 35°C)
Operating Temperature
Page 11
User's Manual
User's Manual
Troubleshooting
If your projector does not seem to be functioning properly, check the items below before you
contact an authorized service center.
Symptom
The projector cannot be
Check to be sure the USB Cable is plugged in
turned on.
correctly.
Make sure the PC has been switched to projector
display.
The projected image is
Use the projector in a darker environment.
too dark.
Increase the brightness by using the AC power
adapter.
Decrease the size of projected image.
The projected image is
Adjust the focus. Please refer to "Adjusting the
dim.
Focus" section of manual.
Check the lens to be sure it is clean.
The surface
It is normal for this projector to generate heat over
temperature of
long term use. This will not affect the performance
projector is warm.
of projector. The projector case will help to dissipate
heat so that its surface temperature will ascend.
Always keep the ventilation slots free of dirt or
obstructions and operate the projector in a properly
ventilated environment.

Reset Your Device

Occasionally, you may need to reset your Portable Projector.
(This can be useful when a program is not performing
properly.)
To reset, locate the small hole on the end of the device
shown as the RESET button.
Using the tip of paper clip, gently push the button in.
Page 12
Check Point
Reset Hole
Tabla de contenido
loading

Tabla de contenido