Functional Elements And Controls; Assembly - Rotwerk RB 14 Manual Del Usuario

GB DE
Storage, care and maintenance
• Keep unused tools in a safe place!
Unused tools should be kept in a dry,
locked location, out of reach of children.
• Treat tools with care!
Keep tools sharp and clean, and keep han-
dles dry and clean. This will enable you to
work more efficiently and more safely. Fol-
low the maintenance instructions and the
instructions on tool changing.
• Repairs by specialist staff
Repairs may only be carried out by a
specialist workshop or by qualified spe-
cialist staff.
FUNCTIONAL ELEMENTS AND
CONTROLS
Overview
A
1 Protective cover, belt housing
2 Speed diagram / Speed indicator
3 Emergency-stop switch
4 ON button
5 OFF button
6 Drilling spindle with MT 1 mount
7 Drill chuck with tapered mandrel
MT 1 / B 16
8 Plate
9 Machine base
10 Fixing holes (6 x)
11 Flange for column attachment
12 Fixing screws (3 x)
13 Plate holder
14 Column
15 Drill chuck guard
16 Clamping screw for drill chuck guard
17 Drilling depth stop with scale
18 Motor adjuster lever
20
B
19 Screw, protective cover
20 Advance knob
21 Drilling head fixing screw
22 Clamp for motor adjuster
23 Motor
24 Plate height adjuster locking lever
25 Plate locking screw
26 Cable gland with plastic guard
27 Power cord
28 Work lamp
29 Light switch
C
30 Safety switch
31 Front pulley
32 Rear pulley
33 V-belt
D
34 Power cable connector

ASSEMBLY

E
1) Mount the column on the base. Make
sure the fixing pin in the column is
pointing forward and the upper slot
(35) is pointing to the right.
2) Secure the flange to the base by fixing
screws (12).
3) Fit the plate holder (13) on the column
from above and fix it in place.
4) Mount the machine head on the drilling
column and fix it in place by the screw
(21) on the side.
5) Screw on the levers for the advance
and the motor adjuster.
6) Mounting the drill chuck:
Degrease the taper bore of the work