Rotwerk RB 14 Manual Del Usuario página 19

• Warning! Sharp chips!
Never remove chips with your bare
hands. You risk being injured. To re-
move chips use a suitable collector.
With the machine switched off, remove
chips using a brush.
• Do not overload the machine!
It will work more efficiently and more
safely within its specified capacity
range. Do not use the machine or the
tools for purposes for which they were
not intended.
• Secure the tool and the workpiece!
Make sure the tool and the workpiece
are firmly clamped in place and secured.
• Avoid abnormal body postures!
Make sure you are standing steady and
keep your balance at all times.
• Take care!
Pay attention to what you are doing. Use
common sense. Do not use the machine
if you are lacking concentration or tired.
Working on the machine is prohibited
especially if you are under the influence
of alcohol, drugs or medication!
• Unplug the plug from the wall
socket!
In the event of faults, when the machine
is not in use, prior to servicing and when
changing tools, always switch the ma-
chine off and pull the mains plug.
• Do not leave tool keys inserted!
Before switching on the machine, check
that keys and adjusters have been re-
moved.
• Use only original parts!
You may risk injury by using accesso-
ries or ancillary equipment other than
recommended in the Technical Manual.
Electrical safety
Caution: Accidents and injury due to
electric shock can be avoided as fol-
lows:
• Pay attention to the correct mains
voltage!
Make sure the mains voltage matches
the specifications on the rating plate.
• Use a socket outlet with a grounding
contact!
The machine may only be operated from
a socket outlet with a properly installed
grounding contact.
• Extension cable
The litz wire cross-section of an exten-
sion cable must be at least 1.0 mm
ways reel out a cable drum fully before
using it. Check the cable for damage.
• Protection against electric shock
Avoid body contact with grounded com-
ponents (such as pipes, heating radia-
tors, cookers, refrigerators).
• Danger from electrical energy!
There is electrical equipment inside the
machine. Regularly check the mains
power cable, the extension cables and
the housings of electrical components.
Have damage repaired by an accredited
electrician.
• Protect the mains power cable!
Do not use the mains power cable for
purposes for which it was not intended.
Do not use the cable to pull the plug
out of the wall socket. Protect the cable
against heat, oil and sharp edges. Nev-
er work with a damaged power cable.
GB DE
. Al-
2
19