Accessing Fax Settings Menu; To Set Or Verify The Date And Time - HP LaserJet 300 Manual De Instrucciones

Accessing fax settings menu

The required fax settings are set using the fax settings menu. The fax
menu is accessed from the MFP control panel Menu button, see
Figure 1-11, "MFP control panel."
If the fax menu settings do not appear in the menu listing, LAN fax may
Note
be enabled. When LAN fax is enabled, the analog fax accessory is
disabled and the fax menu does not display. Only one fax feature, either
LAN fax or analog fax, can be enabled at a time. The fax icon displays
for either fax feature. If you wish to use analog fax when LAN fax is
enabled, use the HP MFP Digital Sending Software Configuration
Utility to disable LAN fax.
MFP control panel
Figure 1-11
For detailed information on the operation of the MFP control panel,
see the MFP user guide.

To set or verify the date and time

The date and time setting for the fax accessory is the same value as
the MFP date and time setting. If this is the first time you are powering
up the MFP, you will prompted for this information.
To verify or change the date and time settings, complete the following
steps.
1
2
3
4
5
12 Chapter 1 Setting up
Touch-screen area
On the control panel, press the Menu button to display the main
menu.
Touch FAX to display the fax menu.
Touch FAX SETUP REQUIRED to display the required settings
menu.
Touch DATE/TIME to display the settings.
Select the date format and then enter the date.
Fax icon
Fax
Menu button
Start button
ENWW