Appendix Faq - Abit 5001 Manual Del Usuario

1. How do I configure the router to access Internet by ADSL users?
(1) First, configure the ADSL modem configured in RFC1483 bridge model.
(2) Connect the Ethernet cable from your ADSL modem to the WAN port on the router. The telephone
cord plugs into the Line port of the ADSL modem.
(3) Login to the router, click the "TCP/IP settings" menu on the left of your browser, and click "WAN
Interface" submenu. On the WAN page, select "PPPoE" for WAN Connection Type. Type user name
in the "User Name" field and password in the "Password" field, finish by clicking "Connect".
(4) If your ADSL lease is in "pay-according-time" mode, select "Connect on Demand" or "Manual" for
Internet connection mode. Type an appropriate number for Time to avoid wasting paid time.
Otherwise, you can select "continuous" for Internet connection mode.
2. How do I configure the router to access Internet by Ethernet users?
(1) Login to the router, click the "TCP/IP Settings" menu on the left of your browser, and click "LAN
Interface" submenu. On the WAN page, select "DHCP" for "Client", finish by clicking "Apply
Changes".
(2) Some ISPs require that you register the MAC Address of your adapter, which is connected to your
cable or DSL modem during installation. If your ISP requires MAC register, login to the router and
click the "TCP/IP Setting" menu link on the left of your browser, and then click "LAN Interface", if
your PC's MAC address is proper MAC address, type your PC's MAC address will fill in the "Clone
MAC Address" field. Or else, the format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click
the "Apply Changes" button. It will take effect after rebooting.
3. I want to use Net meeting, what do I need to do?
(1) If you start Net meeting as a sponsor, you don't need to do anything with the router.
(2) If you start as a responsor, you need configure Virtual Server or DMZ Host.
(3) How to configure Virtual Server: Login to the router, click the "Forwarding" menu on the left of your
browser, and click "Port forwarding" submenu. On the "Port Forwarding" page, enter "1720" into
the blank below the "Service Port", and your IP address below the IP Address, assuming
192.168.1.169 for an example, remember to click "Apply changes".
(4) How to enable DMZ Host: Login to the router, click the "firewall settings" menu on the left of your
browser, and click "DMZ" submenu. On the "DMZ" page, click "Enable DMZ" radio and type your IP
address into the "DMZ Host IP Address" field, using 192.168.1.169 as an example, remember to
click "Apply Changes".
4. The wireless stations cannot connect to the router.
(1) Make sure the "Disable Wireless LAN Interface" is not select.
(2) Make sure that the wireless stations' SSID accord with the router's SSID.
(3) Make sure the wireless stations have right KEY for encryption when the router is encrypted.
(4) If the wireless connection is ready, but you can't access the router, check the IP Address of your
wireless stations.
A p p e n d i x
A p p e n d i x
36
F A Q
F A Q