Virtual Ap Settings - Abit 5001 Manual Del Usuario

This page is used for configure the parameters for wireless LAN clients which may connect to your Access
Point. Here you may change wireless encryption settings as well as wireless network parameters.
Mode: Default is AP
SSID: Enter a value of up to 32 characters. The same name (SSID) must be assigned to all wireless
devices in your network. The default SSID is repeater, but it is recommended strongly that you
change your networks name (SSID) to a different value.
Channel: This field determines which operating frequency will be used. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby access
point.

4.2.4 Virtual AP settings

This page shows and updates the wireless setting for multiple AP.
21