Abit 5001 Manual Del Usuario página 16

【This page is used for configure these parameters】
Band: Indicates the current mode 2.4GHz (B+G+N), 2.4GHz (G+B), 2.4GHz (B)
Mode: Default is AP; you can select Infrastructure Client or AP
SSID: Enter a value of up to 32 characters. The default SSID is CD-R KING, but it is recommended
strongly that you change your networks name (SSID) to a different value.
Channel: This field determines which operating frequency will be used. It is not necessary to change
the wireless channel unless you meet interference problems with another nearby access point.
Click Next, Wireless Security Settings will appear. This page allows you to setup the wireless
security. Turn on WEP or WPA by using Encryption Keys could prevent any unauthorized access to
your wireless network. You can select Open, WEP, WPA-PSK, WPA2 -PSK.
Click Finished to finish the configuration
N o t i c e :
N o t i c e :
If you change the parameters of wireless, the router will reboot automatically.
WPA-PSK： Provides TKIP (Temporal Key Integrity Protocol) or AES (Advanced Encryption Standard).
16