Steam Dispensing - LaCimbali M34 SELECTRON Uso E Instalacion

Scalding hazard!
insulating devices (A) to move the water and
steam wands.
Dispensing with the Turbosteam selector (13)
Machines equipped with the TURBOSTEAM (STOP
STEAM) dispensing system have the "stop steam
dispensing when set temperature is reached" function, and
can rapidly heat and froth milk.
The Turbosteam selector keys have different functions
according to the following con guration:
frothed milk (high froth);
TS4
frothed milk (medium froth);
TS3
frothed milk (low froth);
TS2
heated milk;
TS1
steam.
NOTE: During the programming phase, the Turbosteam
selector keys (TS1 ÷ TS4) can be con gured differently
according to different needs.
Insert the steam nozzle (9a) into a suitable container,
making sure the bulb is completely immersed in the milk.
Choose the type of milk you prefer and press the related
key.
Once the set temperature has been reached, steam
dispensing will stop automatically.
Dispensing can be interrupted at any time by pressing any
Turbosteam selector key (13).
Steam dispensing with knob control
The steam frother system (20) is suitable for beverages
that need to be mixed because the steam ow can be
gradually opened.
Insert the steam dispensing wand (9) in a suitable container.
Open the steam and close it when the beverage is heated.
Note: At the conclusion of each steam dispensing
phase, clean the inside of the steam nozzle as
follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.

15. Steam dispensing

Use the appropriate
13 EN
TS4
20
9
TS1
TS2
TS3
13
9a
A