Optika B-190TB Serie Manual De Instrucciones página 9

7.3.2 B-190TB
1. Remove the dust cap from the microscope frame
and from the bottom of the observation head.
2. Insert the optical head above the stand and tight-
en the screw. (Fig. 5)
• Hold the head with one hand during the
locking in order to avoid that the head falls.
3. Insert both eyepieces into the tubes of the optical
head. (Fig. 6)
4. Insert the power supply jack in the socket placed
at the rear side of the microscope. (Fig. 3)
5. Fix the rotating part of the junction using the black
wing-nut ①. (Fig. 7)
6. Then hook the Tablet PC onto the 4 screws of the
junction and pull toward down to firmly lock the
Tablet PC in the holder. (Fig. 8)
• To unlock the Tablet PC proceed with the oppo-
site operation: push toward up and remove it from
the holder.
Page 9
F ig. 5 F ig. 5
F ig. 6 F ig. 6
①
F ig. 7 F ig. 7
F ig. 8 F ig. 8