Polarizing Set (Optional) - Optika B-190TB Serie Manual De Instrucciones

7. Plug one side of the cable named CAMERA CON-
NECTION (USB + OTG) ② to the digital head
and the other side to the Tablet PC. (Fig. 9).
8. Plug the cable named POWER SUPPLY CON-
NECTION to the Tablet PC for battery recharge.
• The Tablet has been set with the Rotation func-
tion disabled: this prevents any flipping of the Live
View in order to get a continuous and as large as
possible view of your slide also when the Tablet is
removed from the holder.
• To enable this function again: you can activate
the Rotation by swiping the screen on his bot-
tom right side and selecting Settings + Screen.
Anyway, it's not suggested to activate the func-
tion when the camera is in Live View mode as it
may give troubles when the camera runs at high
resolutions.
7.4

Polarizing set (optional)

1. Place the polarizer on the light exit ① at the base
of the microscope. (Fig. 10)
2. Loosen the head fixing knob ② and remove the
head from the microscope frame. (Fig. 11)
3. Insert the analyzer into the hole inside the frame
③. (Fig. 12)
4. Put back the head into its original position and
lock the fixing knob.
Page 10
②
F F ig. 9 ig. 9
①
F ig. 10 F ig. 10
②
F ig. 11 F ig. 11
③
F ig. 12 F ig. 12