Placing Tool In Service - Ingersoll Rand 88V Manual De Operación Y Mantenimiento

WARNING: Incorrect combinations of grinding wheel, wheel guard and tool speed could result in injury.
Correct combinations are specified below:
Guard Part Number
88V60–A216
88V60–A216M
88V60–106–9
88V60–106–7
LUBRICATION
Ingersoll–Rand No. 50
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
For USA – No. C31–06–G00
Before starting the Tool, unless the air line lubricator is used,
detach the air hose and inject about 1.5 cc of Ingersoll Rand
No. 50 Oil into the air inlet.
Model
88V60P107
88V60P109
88V77P107
88V60P107M
88V60P109M
88V85P107M
Model
88V60S106
88V60S106M

PLACING TOOL IN SERVICE

Wheel Type Wheel Diameter
6,11 5 (127) or 6 (150)
6,11 5 (127) or 6 (150)
27,28
27,28
SPECIFICATIONS
Free Speed
rpm
6,000
6,000
7,700
6,000
6,000
8,500
Free Speed
rpm
6,000
6,000
Maximum Wheel
in. (mm) Thickness
in. (mm)
9 (230)
1/4 (6.4)
7 (180) 1/4 (6.4)
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
Type 27 and 28 Wheel
inches
7
9
7
7
9
7
Type 6 and 11 Wheel
inches
5 or 6
5 or 6
3
Maximum Speed
rpm
– – – 6,000
– – – 6,000
6,000
8,500
FILTER
COMPRESSOR
(Dwg. TPD905–1)
Spindle and
Guard
5/8–11, 7"
5/8–11, 9"
5/8–11, 7"
5/8–11, 7"
5/8–11, 9"
5/8–11, 7"
Spindle and
Guard
5/8–11, 6"
5/8–11, 6"