HP Photosmart C4600 Serie Guía Básica página 42

Chapter 2
Solution 4: Contact HP to replace the power supply
Solution: Contact HP support to request a power supply for the product.
Go to: www.hp.com/support.
If prompted, choose your country/region, and then click Contact HP for information on calling
for technical support.
Cause: The power supply was not intended for use with this product or it had a mechanical
failure.
If this did not solve the issue, try the next solution.
Solution 5: Contact HP support for service
Solution: If you have completed all of the steps provided in the previous solutions and are still
having a problem, contact HP support for service.
Go to: www.hp.com/support.
If prompted, choose your country/region, and then click Contact HP for technical support.
Cause: You might need assistance to enable the product or software to function properly.
The display shows the wrong language
Solution: Change the language setting.
To set your language and country/region
1. Press the button next to Copy on the Home screen.
The Copy Menu appears.
2. Press the top-right, middle-left, and bottom-left buttons in sequence.
The Basic Settings menu appears.
3. Press the button next to Set Language.
4. Press the buttons next to the up arrow or down arrow icons on the display to scroll through
the languages. When the language you want to use is highlighted, press the button next to
OK.
5. When prompted, press the button next to Yes for confirmation.
The Basic Settings menu reappears.
6. Press the button next to Set Region.
7. Press the buttons next to the up arrow or down arrow icons on the display to scroll through
the countries/regions. When the country/region you want to use is highlighted, press the
button next to OK.
8. When prompted, press the button next to Yes for confirmation.
Cause: You might have selected the incorrect language when setting up the product.
I connected the USB cable, but I am having problems using the product with my
computer
Solution: You must first install the software that came with the product before connecting the
USB cable. During installation, do not plug in the USB cable until prompted by the onscreen
instructions.
Once you have installed the software, plug one end of the USB cable into the back of your
computer and the other into the back of the product. You can connect to any USB port on the
back of your computer.
For more information on installing the software and connecting the USB cable, see the Setup
Guide that came with the product.
Cause: The USB cable was connected before the software was installed. Connecting the USB
cable before you are prompted can cause errors.
38 HP Photosmart C4600 series