Krups KM480 Manual De Instrucciones página 12

– Wait 5 seconds to reactivate the auto start function.
„ To cancel the delayed start, press PROG button (l) during 5 seconds. Your coffee maker
turns to stand-by mode.
– PRE-INFUSION MODE
„ Press the PRE-INFUSION button (o) to make your coffee stronger.
„ The PRE-INFUSION indicator lights up Fig. 14.
„ To cancel the PRE-INFUSION function, press the PRE-INFUSION button again.
– 1-4 CUPS
„ This function is specially designed for making small amounts of coffee, with optimal
aroma and flavor.
„ To activate this function, press the 1-4 CUPS button (p) before starting the cycle.
„ The 1-4 CUPS indicator lights up.
„ To cancel the 1-4 cups function, press the 1-4 CUPS button again.
„ To remove the used coffee grounds, remove the filter and the filter holder from the coffee
maker. Fig. 16a.
„ Throw the coffee grounds and filter paper in the garbage. Fig. 16b.
„ Do not clean the machine if it is still hot.
„ Wash the removable filter holder in warm soapy water. The carafe may be cleaned in the
dishwasher.
CAUTION: Do not place the carafe in the microwave.
Do not put other parts of the coffee maker into the dishwasher.
„ Clean the coffee maker with a damp cloth or sponge. Never use abrasive or strong
products on any part of the coffee maker.
„ To clean the stainless steel parts of your coffee maker, dampen a soft cloth or sponge
with warm water. Wipe carefully with a dry cloth.
„ For difficult stains, use a cloth with white vinegar.
„ Do not immerse the appliance in water or under the tap.
Why descale?
„ Limestone forms naturally in your coffee maker. Descaling preserves the coffee maker
and ensures it will last longer and provide quality coffee over time. Limestone can
permanently affect the machine's performance. Malfunctions associated with scaling will
not be covered by the guarantee if the product is returned.
When to descale?
„ The descaling frequency depends on the hardness of the water and the number of
brew cycles. If you notice the following signs: longer cycle time, excessive steaming,
more noise at the end of the cycle, stopping mid-cycle, this means your machine has
limestone build up and needs to be descaled.
„ Your coffee maker should be descaled around once a month depending on the hardness
of the water.
12
CLEANING
DESCALING