GE JGP637 Manual Del Usuario página 22

Installation Instructions
D
Installation—Electrical Connections
Because of potential safety hazards
D1
under certain conditions, we strongly
recommend against the use of an
extension cord. However, if you still elect
to use an extension cord, it is absolutely
necessary that it be a UL listed 3-wire
grounding type appliance extension cord
and that the current carrying rating of
the cord in amperes be equivalent to
or greater than the branch circuit rating.
Such extension cords are obtainable
through your local appliance dealer.
IMPORTANT: (Please read carefully) FOR
PERSONAL SAFETY, THIS APPLIANCE
MUST BE PROPERLY GROUNDED.
An adequate electrical supply and outlet
D2
must be used to operate the electrical
parts of your cooktop.
a. The power cord of this appliance is
equipped with a three-prong (grounding)
plug which must be used with a properly
grounded three-hole outlet with a standard
120 Volt, 60 cycle AC household current.
b. If you do not have a three-hole grounded
outlet, have a qualified electrician change
your old one.
c. A grounding adaptor will be needed to
convert the old one until the outlet can be
replaced. This method is only temporary,
and a qualified electrician should test it to
be sure it meets requirements.
N
Insure proper
L
ground and
firm connection
before use
Where a standard two-prong wall
D3
receptacle is encountered, it is the
personal responsibility and obligation
of the customer to have it replaced
with a properly grounded three-prong
wall receptacle.
Do not under any circumstances cut or
remove grounding prong from the
cooktop cord. Failure to provide proper
polarization may create a hazardous
condition.
22