Description Of Connections - Nice MINDY A6-A6F Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Fig. 4
FUSE
5
AF
1
2
3
4
5
The highlighted part is only found on the A700F version.
The highlighted part is found on the A6F and A700F versions.
Only qualified, expert personnel may carry out installation and subsequent maintenance, in compliance with the DPR N°
46 dated 5/3/1990, in total observance of the UNI 8612 standards and following the best indications dictated by "expert
workmanship". Whoever carries out these jobs is held responsible for any damage caused.
2.3) DESCRIPTION OF THE CONNECTIONS:
Here is a brief description of the possible connections of the unit to the outside:
1...3
: 230 Vac
4-5
: Flashing light
6...8
: Motor 1
9...11
: Motor 2
Note: Motors 1 and 2 only differ in the start delay; the 1st motor is connected to the opening delay time "TRA" while the
2nd motor is connected to the closing delay time "TRC". If the delays are unnecessary there is no difference between the motors.
FUSE
500mA
6
7
8
9
10 11
M1
M2
2
2
= 230 V a.c. 50 Hz
= Output for connection to the 230 V a.c. flashing light, maximum lamp power 100 W
= 230 V a.c. output for connection to the 1st motor, maximum motor power
= 230 V a.c. output for connection to the 2nd motor, maximum motor power
FUNCTIONS 1-10
12 13 14 15
16 17 18 19 20
RADIO
44
43
42
41
FUNCTIONS 11-20
PIU'
21 22 23 24 25 26 27 28 29
30
1
/
Hp
2
1
/
Hp
2
English
ANT.
2° Ch
RADIO
25
Tabla de contenido
loading

Este manual también es adecuado para:

Mindy a700f

Tabla de contenido