Procedure For Changing The Trays - FAS International SPIRALI HDR Manual Del Usuario

36

10.5 PROCEDURE FOR CHANGING THE TRAYS

from a large space to two little spaces (Fig. 10)
E
N
G
L
I
S
10.6 PROCEDURE FOR CHANGING THE TRAYS
H
from two little spaces to one large space (Fig. 10)
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: [email protected]
1) Open the main door.
2) Switch the main switch off.
3) Take out the tray you wish to alter.
4) Take out the group motor + spiral ref.1.
5) Take out the tray ref.3.
6) Replace the spiral with large diameter with one with small diameter.
7) Insert the group motor + spiral with small diameter in the left slot of the support
ref.4.
8) Insert the new group motor + spiral with small diameter in the right slot connecting
it to the wiring placed on the tray .
9) Add the new divider blades between the two spirals.
10) Insert the new price labels and the selections.
11) Insert the altered tray and switch the connector on.
12) Programme the new selections to the wished selling price.
13) Check the altered selections to make sure that they are working.
1) Open the main door.
2) Switch the main switch off.
3) Take out the tray you wish to alter.
4) Take out the group motor + spiral ref.1.
5) Take one of the two groups apart. Replace on the other one the spiral with small
diametr with a spiral with large diameter.
6) Take out the divider blade ref.2.
7) Insert the tray ref.3.
8) Insert the group motor + spiral with large diameter in the middle slot of the support
ref.4.
9) Insert the new price labels and the selections.
10) Insert the altered tray and switch the connector on.
11) Programme the
NOTE: By the selections with large spaces the number of selections will be
odd. Example: If selections A1 and A2 will be changed to a single
compartment, the selection becomes A1.
12) Check the altered selections to make sure that they are working.
new selections to
Fig. 10
Spirali HDR Panzer - Issue 00
the wished selling price.