Battery Mode; Bypass Mode; Battery Test; Fault Status - Phasak PH 9360 Manual Del Usuario

State Mode
When the input voltage is beyond the
acceptable range or power failure,
UPS will backup power from battery and alarm

Battery mode

will beep every 4 seconds.
When input voltage is within acceptable
range and bypass is enabled, turn off the
UPS and it will enter Bypass mode. Alarm

Bypass mode

beeps every two
minutes.
When UPS is in AC mode or CVCF mode,
press "Test" key for more than 0.5s. Then
the UPS will beep once and start "Battery
Test". The line between I/P and inverter

Battery test

icons will blink to remind users. This
operation
is used to check the battery status.
State Mode
When UPS has fault happened, it will display
fault messages in LCD

Fault status

panel.
.
ON-LINE RACK
Description
Description
​
P H 9360 - PH 9301 .
Display LCD
Display LCD
94 / 100