Operations; Button Operation; Led Indicators And Lcd Panel - PowerWalker VFI 10000CP 3/3 Manual De Instrucciones

3. Operations

3-1. Button Operation

Button Function
 Turn on the UPS: Press and hold the button more than 0.5s to turn on the UPS.
ON/Enter Button
 Enter Key: Press this button to confirm the selection in setting menu.
 Turn off the UPS: Press and hold the button more than 0.5s to turn off the UPS.
OFF/ESC Button
 Esc key: Press this button to return to last menu in setting menu.
 Battery test: Press and hold the button more than 0.5s to test the battery while
Test/Up Button
 UP key: Press this button to display next selection in setting menu.
 Mute the alarm: Press and hold the button more than 0.5s to mute the buzzer.
Mute/Down Button
 Down key: Press this button to display previous selection in setting menu.
Test/Up +  Press and hold the two buttons simultaneous more than 1s to enter/escape the
Mute/Down Button
* CVCF means Constant Voltage and Constant Frequency.

3-2. LED Indicators and LCD Panel

LED Indicators:
There are 4 LEDs on front panel to show the UPS working status:
Mode LED
UPS On
No Output mode
Bypass mode
AC mode
Battery mode
CVCF mode
Battery Test
ECO mode
Fault
●
Note: means LED is lighting, and
in AC mode and CVCF* mode.
Please refer to section 3-4-9 for details.
setting menu.
LCD panel
Bypass Line
● ●
○ ○
●
○
●
○
○ ○
●
○
● ●
● ●
○ ○
○
means LED is faded.
Battery
●
○
○
○
●
○
●
○
○
10
LED indicators
Fault
●
○
○
○
○
○
○
○
●
EN