Getting Started; Turning Power On And Off; Initial System Start-Up; Setting The Time And Calendar - Alpine DVA-9965 Manual De Operación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Getting Started

SOURCE/
POWER
MUTE
MENU

Turning Power On and Off

Press SOURCE/POWER to turn on the unit.
• The unit can be turned on by pressing any other button except eject
c and
.
Press and hold SOURCE/POWER for at least 2
seconds to turn off the unit.
• The first time power is turned on, the volume will start from level 12.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first
time, after installing the CD changer, after changing the car battery, etc.
1
Turn off the unit power.
2
Press RESET with a ball-point pen or similar
pointed object.
8
-EN
RESET
Rotary encoder
c
GlideTouch bar

Setting the Time and Calendar

1
Press MENU.
2
Select Setup by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Setup.
The main SETUP menu is displayed.
3
Select GENERAL by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under GENERAL.
The GENERAL SETUP menu is displayed.
4
Select CLOCK ADJUST by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under CLOCK ADJUST.
5
Select "Year" by sliding your finger on the
GlideTouch bar to the left or right.
6
Adjust "Year" by turning the Rotary encoder.
7
Adjust "Month", "Day", "Hour" and "Minute" by
turning the Rotary encoder by repeating steps 5
and 6.
8
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold the Rotary encoder for at least 2
seconds after setting the "hour." Minutes will reset to 00.
If the display shows over "30" minutes when you do this, the time
will advance to the nearest hour.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
Tabla de contenido
loading

Tabla de contenido