Attaching Upper Tether Straps - Tesla Model X Manual Del Propietário

Child Safety Seats
Once installed, test the security of the
installation before seating a child. Attempt to
twist the child safety seat from side to side
and try to pull it away from the seat, then
check that the anchors are still securely in
place.

Attaching Upper Tether Straps

If an upper tether strap is provided, attach its
hook to the anchor point located on the back
of the second and third row seats.
For dual-strap tethers, position a strap on
each side of the head restraint.
The method you use to run a single-strap
tether over a second row seat depends on
whether Model X is equipped with monopost
or bench seats:
• On monopost seats, run the strap in an
outside seating position to the same side
of the head restraint as the seat belt
retraction mechanism. In the center
seating position (if equipped), run the
strap over the top of the head restraint.
• On bench seats, run the strap in an outside seating position to the opposite
side of the head restraint as the seat belt
retraction mechanism. In the center
seating position, run the strap to the left
side of the head restraint.
Tighten upper tether straps according to the
instructions provided by the manufacturer of
the child safety seat.
Note: To prevent the single-strap tether in the
center position from moving side to side, the
top of the head restraint deforms.
Note: The location of anchor points may not
be readily visible but can be found by
identifying a slice in the seat's material.
Note: If Model X is equipped with the optional
six seat interior, a center seating position is
not available in the second row.
34
Single Strap - Second Row Monopost Seats:
Single Strap - Second Row Bench Seats:
Model X Owner's Manual