Installation Concerns - Nuna PIPA icon Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
Remove this infant child restraint and base from
the vehicle seat when it is not in regular use.
Consult the distributor for issues concerning
maintenance, repair and part replacement.
To avoid the risk of falling out, always secure the
child using the safety harness when the child is
placed in infant child restraint, even when the
infant child restraint is not in the vehicle.
Before carrying the infant child restraint by hand,
ensure that the child is fastened with the safety
harness, and that the handle is correctly locked in
a vertical position.
To avoid serious injury or death, NEVER place
infant child restraint on elevated surface seat with
child in it.
The parts of this infant child restraint should not
be lubricated in any way.
Always secure child in infant child restraint, even
on short trips, as this is when most accidents
occur.
DO NOT use this infant child restraint for more
than 5 years after the purchase date as parts may
degrade over time, or from exposure to sunlight,
and may not perform adequately in a crash.
Please keep this infant child restraint away from
sunlight, otherwise it may be too hot for child's
skin. Always touch test seat before placing child
in it.
Frequently check the ISOFIX guides for dirt
and clean them if necessary. Reliability can be
effected by ingress of dirt, dust, food particles etc.
DO NOT place any objects in the load leg area in
front of your base.
Correct Installation is only permitted by use of the
ISOFIX connectors.
17
After your child is placed in this infant child
restraint, the safety belt must be used correctly,
and ensure that any lap strap is worn low down,
so that the pelvis is firmly engaged.
DO NOT use any load bearing contact points
other than those described in the instructions and
marked on the infant child restraint.
Installation
concerns
This infant child restraint with the Base is suitable
for vehicle seats with i-Size ISOFIX anchor points.
(1)
DO NOT place rear-facing infant child restraint
on front seat with air bag. Death or serious injury
may occur. (2) Please reference vehicle owner's
manual for more information.
DO NOT install this infant child restraint on
vehicle seats that face sideways or rearward with
respect to the moving direction of the vehicle.
(3)
It is recommended to install this infant child
restraint on the rear vehicle seat. (4)
DO NOT install this infant child restraint on
vehicle seats unstable during installation.
18
Tabla de contenido
loading

Tabla de contenido