Turning The Lcd On And Off - CONCORD Eye-Q 4060 AF Manual Del Usuario

Setting the Time
ADJUST TIME
01 : 0 1 A M
OK
RETURN SET
The time is displayed in hour, minute format.
1. Press the joystick
2. Press the joystick
• The selection will blink when it is highlighted.
3. Repeat steps 1 and 2 until the time is set.
4. Press the OK button to set the time by pressing the joystick in.
Note:
The time can be displayed in a 12-hour or 24-hour format. Please go to page.31 to change this setting.
If the battery is removed or dead for more than 4 minutes, the time will return to its default setting.
TURNING THE LCD/ICONS ON AND OFF
The camera has a 1.5" LCD which can frame subjects for image and video clip capture, review stored images
and video clips and to display the current camera settings.
1. Use the ( ) button to toggle the LCD mode. The LCD mode changes each time the button is pressed as
follows:
Note: In order to save battery power, you may turn off the LCD display in (
LCD icons can be turned on or off.
RETURN
to change the selection in the blinking position until you reach the desired setting.
to highlight the hour (HH), minutes (MM) or AM/PM.
Icons off
LCD off
LCD on with icons
ADJUST TIME
01: 01 A M
OK SET
8
GETTING STARTED
ADJUST TIME
01: 02 A M
RETURN SET
OK
4 M
28/45
A
AWB N
07 ⁄ 04 ⁄ 03 02:40PM
) Review Mode, only the