Special Instructions; Safety Instructions; Machine Plate; Pictograms - Carat X-COUP Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 90
1

Special Instructions

The X-COUP is only designed for the cutting of construction products mainly on construction sites. Reading carefully this
manual is compulsory for any person for the use, maintenance, repair of this machine. Uses other than manufacturer's
instructions shall be considered as contravening the regulations. The manufacturer shall not be held responsible for any
resulting damage. Any risk shall be borne entirely by the user.
2

Safety instructions

Read the instructions manual prior operating the machine the fist time.
Remove all safety hazards in the working environment and make it accessible in case of accident. Any person not
involved in the work should leave the working area.
The operator must wear protective clothes including eye and ear protection!
Make sure the machine is in a stable position.
Never leave the machine unattended, untied or unlocked.
Only fit diamond blades on the machine! Check for correct mounting and condition of the blade before using the
machine. Never use a damaged or badly worn blade.
Do not move the machine while the blade is running idle.
Always cut with the blade guard in position.
Always apply cooling water continuously while cutting!
Check the electric cable periodically
3

Machine plate

Code
Machine code
Mod
Machine name
Ser.N.
Serial number
Type
Machine type
4

Pictograms

Read operator's instructions
Hand protection must be worn
Year
Year of production
W
Weight of the machine
P
Power
EN
Safety Standart
Ear protection must be worn
Eye protection shall be worn
33
øext
Maximum blade diameter
øint
Bore diameter
Min-1
Blade speed
Rotation direction of the blade
Danger: risk of cut
Tabla de contenido
loading

Tabla de contenido