Access By Name Via Drop-Down Menus; Figure 13: Drop-Down Menu Selection; Figure 14: Optional Menu Access Schem - DWT WaCS PWM Serie Instrucciones De Instalación Y Mantenimiento

ENGLISH
3.2.2

Access by name via drop-down menus

The menus are selected via their specific name. The user accesses menu selection via the main menu, by
pressing button + or –.
The menu selection pages contains all the names of menus accessible, one of which is highlighted with a
bar (see Figure 13). The buttons + and - can be used to move the highlighter bar to the menu required,
which is then entered by pressing SET.

Figure 13: Drop-down menu selection

The menus available are MAIN, USER, and MONITOR; after access to these, a fourth FULL MENU is
displayed, to enable full display of the menus selected. On selection of EXTENDED MENU a pop-up window
is displayed, requesting entry of a PASSWORD. The PASSWORD is the same as the key combination used
for direct access and enables the user to expand display of the menus from the password-protected menu to
all those with lower priority.
The menu order is: User, Monitor, Setpoint, Manual, Installer, Technical Assistance.
On entry of a password, the unlocked menus remain available for 15 minutes or until disabled manually by
means of the menu command "Hide advanced menus" which appears on selection of menus after entry of
the password.
Figure 14 shows the functional scheme for menu selection.
The centre of the page shows the menus; the user can access these from the right using the button
combinations, or from the left by means of the drop-down menu selection system.
Figure 14: Optional menu access scheme
92